Summer offer 20% off all hull cleans booked through July 2026 — claim your quote

Gibraltar marina beneath the Rock of Gibraltar — Up & Clean's home port

Gibraltar · 36.14° N, 5.35° W

Robotic hull cleaning.
Your vessel never leaves the water.

An underwater drone removes fouling while your boat sits at its berth — no dry dock, no downtime, and every gram of growth captured before it touches the sea.

Time on a 40 ft hull
~45 min
Debris captured on-site
100%
Vessel range
6–50 m
Antifouling paint
Untouched

Below the waterline

Growth never stops.
Your hull pays for it.

In Mediterranean water, algae and barnacles colonise a hull within weeks. You don't see it from the deck — you see it at the fuel pump, on the log, and at the helm.

+20% fuel burn on a fouled hull — thousands of pounds a season
−knots lost speed, heavier steering, sluggish handling
+CO₂ every extra litre burned goes straight into the air
24/7 growth colonises around the clock — paint alone can't keep up
HULL CAM 01 · LIVE FEED36.14°N 5.35°W
Our drone removing marine growth — real footage, one pass.
HULL CAM 02 · INSPECTION36.14°N 5.35°W
Underwater before-and-after: fouled hull section next to a freshly cleaned section
Before and after on the same hull — the difference is immediate.

The machine

A drone built for one job: your hull

No divers scraping blind, no haul-out. The robot crawls the hull on suction while our operator watches every square metre through its cameras.

The underwater hull-cleaning robot: camera array above twin counter-rotating brush drums Close-up of the robot's soft brush wheels, safe for antifouling paint
  • Brushes

    Counter-rotating, paint-safe

    Soft brush drums lift algae and barnacles without stripping antifouling — a 40 ft hull takes about 45 minutes.

  • Adhesion

    Holds curved hulls up to 50 m

    Suction keeps the drone locked on even across chines and bow flare, from motorboats to superyachts.

  • Cameras

    Live HD operator feed

    Every pass is watched in real time, so nothing is missed — and you get the footage in your report.

  • Filtration

    50–180 micron waste capture

    An onboard filter bag traps everything the brushes remove. Nothing is released into the sea.

The process

Six steps, fully documented

From first inspection to final report, every clean follows the same controlled procedure — and you get the evidence.

  1. 01

    Pre-clean inspection

    We film your hull's condition before touching it, establishing a clear baseline.

  2. 02

    Drone deployment

    The robot is lowered at your berth and attaches to the hull by suction. No scaffolding, no haul-out.

  3. 03

    Systematic cleaning

    Counter-rotating brushes work the hull in overlapping passes — algae, slime, and barnacles off.

  4. 04

    Waste capture

    All removed growth collects in the onboard filter bag and is disposed of ashore.

  5. 05

    Post-clean inspection

    A full camera review confirms complete coverage before we call it done.

  6. 06

    Operator report

    You receive the before-and-after record of your hull's condition for your files.

Services

Hull to propeller, robot to diver

Motor yacht underway at speed on clean water

Robotic hull cleaning

For yachts, superyachts, light ferries, and commercial vessels from 6 to 50 metres. The same certified, paint-safe process at every scale — priced at £25/m² with a free on-site quote first.

  • Private yachts & superyachts
  • Light sea ferries — fuel savings at fleet scale
  • Commercial vessels — custom assessment
More about robotic hull cleaning
Up & Clean's diver hand-cleaning a hull at the waterline

Propeller & running gear, by hand

While the robot handles the hull, our certified diver takes care of what it can't: propellers, shafts, rudders, and thrusters — cleaned gently by hand, with an underwater photo report after every dive.

  • Free propeller clean with every annual package
  • Shaft, rudder & thruster inspection
  • No damage to anodes or coatings
More about propeller cleaning

Pricing

£25 per square metre. That's it.

Slide to your boat's length for an estimate based on typical hull dimensions. We confirm the exact price with a free on-site assessment before any work begins.

10metres
6 m20 m

Estimated hull area: ~20 m² × £25/m²

Single clean

20% off

£400per clean

  • Pre & post-clean inspection
  • Full operator report
  • Eco-certified, paint-safe process
  • Zero discharge into the water
Get a quote

Estimates use a standard hull-area approximation. Your exact price is confirmed in person, free, before any work begins.

Zero discharge

Cleaner hulls, cleaner sea

Everything the brushes remove ends up in the filter bag, not the harbour. The process is certified, safe for antifouling coatings, and keeps your vessel out of the dry dock — where the real environmental cost lives.

  • Paint-safe — extends antifouling life instead of stripping it
  • 100% waste captured — filtered on board, disposed ashore
  • Fewer haul-outs — less dry-dock disruption for hull and habitat
  • Lower emissions — a clean hull burns meaningfully less fuel

FAQ

Questions owners actually ask

How much does hull cleaning cost in Gibraltar?

Hull cleaning is priced at £25/m² of hull area, so a typical 10 m boat comes to roughly £500 per clean. We offer an annual package of 4 cleans for the price of 3, plus a free propeller clean. All pricing is confirmed with a free on-site quote — no surprises.

How often should I clean my boat's hull?

In warmer months we recommend cleaning once a month due to accelerated marine growth in the Mediterranean. In cooler months, once every 3 months is sufficient. Regular cleaning prevents fouling build-up and protects your antifouling paint. Read our full guide to hull fouling.

Is robotic hull cleaning safe for antifouling paint?

Yes. Our certified robotic system is designed to be safe for all antifouling coatings. It removes marine growth without stripping the paint, and can actually extend the effectiveness and lifespan of your antifouling.

What size vessels do you service?

Everything from 6 m motorboats to 50 m superyachts, light ferries, and commercial vessels. For boats over 15 metres we provide tailored pricing based on a detailed hull assessment.

Do you operate outside Gibraltar?

While based in Gibraltar, we service vessels across the Western Mediterranean including the Costa del Sol, Marbella, Algeciras, and La Línea. Contact us to discuss deploying to your location.

Is the process environmentally friendly?

Yes. All removed marine growth is captured on-site in the robot's onboard filter bag — nothing enters the water. The process is certified and designed to protect Gibraltar's marine environment at every step.

Get in touch

Get your free quote

Tell us about your vessel and we'll come back within 24 hours with a price. Based in Gibraltar, serving the Western Mediterranean and Costa del Sol.

Mon–Fri 08:00–18:00 · Sat 08:00–14:00
Gibraltar · 36.14° N, 5.35° W

Opens WhatsApp with your details pre-filled. We reply within 24 hours.

Request sent

Thanks — we'll review your details and get back to you within 24 hours.